ZWave temperature, humidity, dew point sensor: Aeotec aërQ, w
ZWave temperature, humidity, dew point sensor: Aeotec aërQ, w
- Make sure this fits by entering your model number.
- Wireless, battery powered, Z-Wave temperature and humidity sensor
- Super-small at 1.38 inches. It can be installed almost anywhere you need to measure temperature and humidity, and analyse some attributes of air health.
Product Description
Accurate temperature amp; humidity sensor for HVAC and air quality automation
The correct temperature. Wherever you need it.
Powered by 1 coin-cell battery, and not much bigger than a coin itself, Aeotec's aërQ Temperature and Humidity Sensor is a 4-in-1 multi-sensor that offers:
-
"li"temperature measurement between 14°F to 146°F
"li"humidity measurement between 0 to 80% relative humidity
"li"dew point measurement between 14°F to 146°F
"li"mould-formation-potential warning of the risk of harmful-to-health mould forming in your rooms
Each of these data points and sensors within aërQ Temperature and Humidity Sensor are transmitted wirelessly from the sensor to the compatible Z-Wave gateway it's connected to. Particular data points require gateway compatibility. The sensor is tested to be compatible with AutoPilot, Fibaro, Home Assistant, HomeSeer, Indigo 7, and Z-Wave JS. To see if your gateway is compatible, check aeotec.com/z-wave-gateways/compatibility.html
Aeotec makes quality connexions
Founded in 2006 as Aeon Labs in Silicon Valley, Aeotec has long focussed its craft on the intelligent automation of electronics through sensor and data driven decision making. We look at a home and imagine how it can be better through technology. Then we work to make it happen. Friendly and professional support team are at your service 24/7, More details, just kindly tell us
- Package:
- 1* Zwave Temp and Humidity sensor
- 1* 3A battery
- 1* User Manual
aërQ Temperature amp; Humidity Sensor
Accurate air management.
This is a secure Alarm Sensor
- The device contains two sensors with the following accuracy measures:
- Relative Humidity: precision ± 3% RH (max), range 0 to 80% RH
- Temperature: precision ±0.4 °C (max), range 0 to 65 °C
- Dew Point: precision ±0.4 °C (max), range 0 to 65 °C (calculated from other sensor values)
- The device sends the following notifications to the central controller:
- Weather Alarm - Moisture Alarm(0x10 - 0x02)
- Power management - Replace battery now(0x08 - 0x0b)
- Heat Alarm - Overheat Unknown Location(0x04 - 0x02)
- Heat Alarm - Underheat Unknown Location(0x04 - 0x05)
Zwave Sensor for Temperature and Humidity Monitor
|
|
|
|
|
|---|---|---|---|
Indoor Temperature Humidity MonitorZwave smart temperature sensor and smart humidity sensor measures the three air quality parameters temperature, humidity and dew point and alerts will be sent to the z-wave gateway immediately when data goes out of the preset range. Besides this, the z wave sensor can directly control groups of other z wave devices on over- and undershooting a set temperature and/or humidity parameter. |
Mold Detector for HomeThe mold detector is actively monitoring the danger of mold in a room based on the temperature and humidity and will issue alarm warnings when critical air conditions met. Wireless Alarm and red and a green blinking LED will indicate a mold condition. This local LED warning function is also available when the device is not included in any Z-Wave network and works stand alone. |
Aeotec Gen7 TechnologySecurity sensors have to be secure. Automation sensors hae to be advanced. Recessed Door Sensor 7 is powered by Aeotecâs Gen7 technology and features Z-Wave Plus, S2 wireless security, SmartStart installation, 50% faster wireless communication for seamless automation, Wireless range now up to 250% further and Full Aeotec production: German engineering, European design, Shenzhen high-tech manufacturing |
Remote MonitoringAeotec can always provide you with the comfort of knowing whatâs happening at home while youâre away. This can be used to establish control loops for temperature and humidity. The zwave sensor wakes up every 15 minutes to measure the values and it will send unsolicited reports when values change. Additionally, the device will report all values on request. Ensure your little one stay cozy without disturbing. Fully compatible Z-Wave gateways will empower you to tap into its measurements and analysis, using various data points and conclusions to enable powerful and intelligent automations. |
One tiny sensor that offers monitoring of crucial indoor temperature, humidity, and health risk measurements
Measurement. And automation
How it works
- Insert fresh 1 * CR2477 battery
- A click on the central button wake up the zwave device
- Scan the QR code on cover of the device. Will add the device automatically when powered up.
Quick troubleshooting
Here are a few hints for network installation if things donâât work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
Note: Make sure to have enough mains powered device to benefit from the meshing
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MultiSensor 6 | TriSensor | Door Window Sensor 7 Pro | Recessed Door Sensor 7 | Water Sensor 7 Pro | Z-Stick Gen5 Plus | |
| Model Number | ZW100-A | ZWA005-A | ZWA012-A | ZW187-A | ZWA019-A01 | ZW090-A |
| Feature | 6 Sensors: Motion sensor/ Temperature sensor/ Light sensor/ Humidity sensor/ Vibration sensor/ UV sensor | 3 Core sensors: Motion sensor/ temperature sensor/ Light intensity sensor | 3-in-1 Zwave Door Window Sensor: magnetic contact, dry contact relay, and a tilt sensor | Comprised of two parts: the main z-wave door sensor and the magnetic door contact sensor | 3 in 1 leak, temperature, humidity sensor | 2020 SmartStart and S2 Enabled, Works with Raspberry Pi 4 |
| S2 Security | No | â | â | â | â | â |
| SmartStart | No | No | â | â | â | â |
| Gen7 | No, Gen5 | No, Gen5 | â | â | â | No, Gen5 |
| Z-Wave Plus | â | â | â | â | â | â |